Vision Sensoren von Sensopart
SensoPart develops, produces and distributes a wide range of innovative sensors for factory automation. The main focus is on optoelectronic sensors and camera-based vision sensors, which are used in numerous applications and industries, from automotive and mechanical engineering to the electronics and solar industries and Food and pharmaceutical industry.
The vision sensor VISOR ® Robotic was developed especially for the challenges in robotics applications. It is a powerful vision sensor with integrated evaluation, optics, lighting and interfaces to the controller or robot. It is designed directly on the robust and lightweight sensor, no PC is necessary.
Why you should use this camera with drag&bot
VISOR® ROBOTIC – Highlights
Easy to use configuration software
Extensive hardware spectrum with up to 5 MegaPixel resolution and various (integrated) lighting and optics
Gripper space check
Result-offset correction in VISOR® software for simple adjustment of gripper points
Two calibration methods for robotics applications
Offset of work plane through Z offset function
Flexible output protocol using TCP/IP
Models
Product | Product version | Resolution | Focal length | Integrated lighting |
---|---|---|---|---|
V50x-RO-P3-C-2 | Professional | 2560 x 1936 mono/couleur | C-mount | none |
V20x-RO-A3-xxx | Advanced | 1440 x 1080 mono/couleur | wide | white, red or infrared LEDs |
V20x-RO-A3-xxx | medium | white, red or infrared LEDs | ||
V20x-RO-A3-xxx | narrow | white, red or infrared LEDs | ||
V20x-RO-A3-C-2 | C-mount | none | ||
V20x-RO-P3-xxx | Professional | 1440 x 1080 mono/couleur | wide | white, red or infrared LEDs |
V20x-RO-P3-xxx | medium | white, red or infrared LEDs | ||
V20x-RO-P3-xxx | narrow | white, red or infrared LEDs | ||
V20x-RO-P3-C-2 | C-Mount | none | ||
V10-RO-A3-xxx | Advanced | 800 x 600 mono | wide | white, red or infrared LEDs |
V10-RO-A3-xxx | medium | white, red or infrared LEDs | ||
V10-RO-A3-xxx | narrow | white, red or infrared LEDs | ||
V10-RO-A3-C-2 | C-mount | none |
How does deployment work?

Graphical user interface for every robot – drag&bot OS
SCENARIO DESIGNER – 3D models of the robot cell and the workpieces can be added here to the visualization.
BUILDER – Applications can be created from predefined function blocks using drag and drop.
WIZARDS – Graphical operating and input aids: Users can adapt function blocks to the specific requirements of their application without expert knowledge.
OPERATOR COCKPIT – This is where the created applications are executed. One click takes you back to the builder and you can extend and optimize the application.
Graphical user interface for every robot – drag&bot
SCENARIO DESIGNER – 3D models of the robot cell and the workpieces can be added here to the visualization.
BUILDER – Applications can be created from predefined function blocks using drag and drop.
WIZARDS – Graphical operating and input aids: Users can adapt function blocks to the specific requirements of their application without expert knowledge.
OPERATOR COCKPIT – This is where the created applications are executed. One click takes you back to the builder and you can extend and optimize the application.
Use any hardware and combine it as you wish
drag&bot supports a variety of different robots, almost all grippers and part supply systems and the most common image processing systems and communication interfaces.
Save valuable time when integrating grippers, cameras or PLC systems. With minimal effort, your hardware is connected to drag&bot and you can get started right away.
Use the hardware that suits your application best!
FREE DEMO
We show you how easy robot programming can be