Combine your Hardware

with drag&bot

kuka

KUKA offers more than 25 different industrial robot types. Drag&bot supports the KUKA iiwa and the KRC4 controller.

More on KUKA

Setup any hardware combination within minutes! With drag&bot you can easily connect your hardware by Plug&Play.

How to do it
robotiq

ROBOTIQ produces flexible robot grippers. Depending on the model, an IO Link, a Digital IO or Modbus is required.

More on Robotiq
  • Robot and gripper are assembled. The robot is connected to the IPC while the gripper is connected either to the IO_Link module or to the robot/PLC IOs.
  • The robot model and the gripper is added and configured in the Component Manager in drag&bot studio. Depending on the gripper, the IP address must be entered to setup the connection.
  • Select your installed components in the Component Manager. Move the robot and the gripper with the Operator Panel directly & intuitively.

Talk to a robot expert!

Your combination is missing and you are wondering if it can be done?
Talk to us and we tell you if it’s possible with drag&bot.

Contact us

Why you should program your robot with drag&bot

QUICK
INTEGRATION

Save valuable time with drag&bot when integrating your hardware

HARDWARE-
INDEPENDENT

Use the robot that suits your application best – drag&bot is flexible in usage

ALL
FUNCTIONS

Use the full range of robot functions without complex industrial protocols

GRAPHIC
PROGRAMMING

Programming via drag and drop, no need for expensive programming training

Flexible automation with drag&bot

Pick and Place

Machine tending, palletizing parts in grids, picking bulk material from boxes with a camera…

Pick and Place

Mechanical assembly

Riveting, gluing, screwing with small tolerances, joining gear wheels, pressing plug-in connections…

Mechanical assembly

Electronics assembly

Processing and assembly of electronic boards, insertion of connectors and cables, top-hat rail mounting…