Combine your Hardware

with drag&bot


FANUC offers more than 100 models of industrial robots. Drag&bot supports all FANUC robots with the R-30iB controller.

More on Fanuc

Setup any hardware combination within minutes! With drag&bot you can easily connect your hardware by Plug&Play.

How to do it

Zimmer serves all sectors of robotics offers, e.g. ready-to-install gripping and handling systems or vaccum systems.

More on Zimmer
  • Robot and gripper are assembled. The robot is connected to the IPC while the gripper is connected either to the IO_Link module or to the robot/PLC IOs.
  • The robot model and the gripper is added and configured in the Component Manager in drag&bot studio. Depending on the gripper, the IP address must be entered to setup the connection.
  • Select your installed components in the Component Manager. Move the robot and the gripper with the Operator Panel directly & intuitively.

Talk to a robot expert!

Your combination is missing and you are wondering if it can be done?
Talk to us and we tell you if it’s possible with drag&bot.

Contact us

Why you should program your robot with drag&bot

Flexible automation with drag&bot