Combine your Hardware

with drag&bot

Denso

DENSO robots are compact and light weighted- Drag&bot supports the RC8A controller and offers a seamless integration.

More on Denso

Setup any hardware combination within minutes! With drag&bot you can easily connect your hardware by Plug&Play.

How to do it
robotiq

ROBOTIQ produces flexible robot grippers. Depending on the model, an IO Link, a Digital IO or Modbus is required.

More on Robotiq
  • Robot and gripper are assembled. The robot is connected to the IPC while the gripper is connected either to the IO_Link module or to the robot/PLC IOs.
  • The robot model and the gripper is added and configured in the Component Manager in drag&bot studio. Depending on the gripper, the IP address must be entered to setup the connection.
  • Select your installed components in the Component Manager. Move the robot and the gripper with the Operator Panel directly & intuitively.

Talk to a robot expert!

Your combination is missing and you are wondering if it can be done?
Talk to us and we tell you if it’s possible with drag&bot.

Contact us

Why you should program your robot with drag&bot

Flexible automation with drag&bot